Flag Heavy Duty Anti-Slip Floor Paint | Thermo-acrylic and polyurethane resins | Tough, durable, flexible and long lasting | Yellow | 5 litres

Product Information

New Concrete– as a guide, new concrete should be left for four weeks to dry in the summer and six in the winter. The surface should then be prepared using Watco Etch & Cleanand thoroughly rinsed away and left to dry prior to applying this coating. In Yellow, Red, Grey and More Provides a safer slip-resistant coating for both residential and commercial environments.

When it comes to applying anti slip paint, you need to consider a number of factors. For example, what is the substrate? Are any steps interior or exterior? Is the area exposed to the elements? Rustoleum Supergrip 7100 NSThis extremely tough and durable single-component synthetic resin based paint is for interior use where Anti-slip properties are required. You may find that there are not enough colour options when choosing from the above products. Never fear, we have the answer! PPG Sigmacover 400 Protecta-kote Rubber Anti Slip paint contains rubber anti-slip granules, giving you an attractive tough textured appearance which is flexible, non abrasive and easy to clean. It is ideal for use on metal, concrete and fibreglass. As with Supergrip 7100NS, Protecta-Kote is suitable for both interior and exterior use. Please bear in mind that smooth or shiny surfaces such as marble, glazed tiles, or aluminium will require a primer. Protecta-kote Clear Primer should be applied prior to the application of the paint on these surfaces, to ensure improved adhesion. New Concrete– new concrete should be left for four weeks to dry in the summer and six in the winter. The surface should then be prepared using Watco Etch & Clean and thoroughly rinsed away and left to dry prior to applying this coating. New concrete – as a guide, new concrete should be left for four weeks to dry in the summer and six in the winter. The surface should then be prepared using Watco Etch & Clean and thoroughly rinsed away and left to dry prior to applying this coating.

Bare Concrete– remove surface laitance, dust and any light dirt or grease deposits using Watco Etch & Clean. Watco Etch & Clean also etches smooth, bare concrete surfaces to provide a key. Flush with clean water and allow surface to dry. For the removal of heavier deposits of oil and grease we recommend Watco Concroff, again, flush with clean water and allow the surface to dry.As with Sigmacover 400, the aggregate can be added to the paint or hand cast over the applied coating.